Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - CSG and RCE tag-team suspension Q&A thread! Ask us anything!

1Cor10:23 · 12-23-2014, 08:44 PM

@Racecomp Engineering @CSG Mike might have made a boo-boo here so I wanted to ask the experts...any issue I should be worried about after winding my adjusters on my coilovers (ohlins R/T) full soft past the 20 clicks (while off the car)? This is my first set of coils and I was just checking out the adjuster, did not know it could actually go past the 20 clicks recommended by Ohlins until I realized that it was way more than 20...at no point did I try to "force" it, it just kept clicking. Thanks!

edit: so I did some testing today and it seems everything is okay...compressed them by hand at varying adjustments and the movement corresponded well to changes. Call ohlins - all good, bounds of the clicks are the thread ends - not taking the needle out of seat or jamming it into the seat.

12-23-2014, 08:44 PM	#2214
1Cor10:23 Senior Member Join Date: Jul 2013 Drives: '13 Whiteout FR-S (M/T) Location: GTA Posts: 1,205 Thanks: 492 Thanked 392 Times in 238 Posts Mentioned: 14 Post(s)	@Racecomp Engineering @CSG Mike might have made a boo-boo here so I wanted to ask the experts...any issue I should be worried about after winding my adjusters on my coilovers (ohlins R/T) full soft past the 20 clicks (while off the car)? This is my first set of coils and I was just checking out the adjuster, did not know it could actually go past the 20 clicks recommended by Ohlins until I realized that it was way more than 20...at no point did I try to "force" it, it just kept clicking. Thanks! edit: so I did some testing today and it seems everything is okay...compressed them by hand at varying adjustments and the movement corresponded well to changes. Call ohlins - all good, bounds of the clicks are the thread ends - not taking the needle out of seat or jamming it into the seat. __________________ \|1Cor10:23 \| Whiteout FR-S \| Form Follows Function Build\| Last edited by 1Cor10:23; 12-30-2014 at 10:56 AM.