[kodyo]

Originally Posted by F1point4

20130831-DBA4650_HawkHPPlus_FrontJob-029 by VictorN07, on Flickr



20130831-DBA4650_HawkHPPlus_FrontJob-041 by VictorN07, on Flickr

Thanks for the write up! It helped a lot today when I changed my pads and rotors out. Couple of comments.

1) For removal, you can actually use the same bolts that hold the aluminum under panel to the car. No need to buy any bolts.

2) These shims can actually come off, they are only stuck to the pad with grease and the way the shims clamp to it.

Sorry for quoting pictures, just figured it would be easier for others coming into this.