Thankfully nothing added, its a stock other than powerblocks installed and battery disconnect recently.
Had success with the manager software now, reading as follows (pic)
Quote:
Originally Posted by steve99
ARRRRH do you have an existing ECUTEK tune.
Ecuteck tunes are locked and will not allow other devices to read.
You need to load a stock rom back to your car , or at least the ecutek stock rom back to car before oft can read your rom.
you may also loose your ecutek licience as its embedded in "stock rom.
although the OFT will write back your stock rom which will have ecutek licience info in it.
if you don't have ecutek tune ignore above.
the oft will clear / read the cel code although its probably just a can buss transmission code cause when you plugged in oft.
just use oft to clear cel codes all should be ok.
just select toyots zn6 first.
|