Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

zeal86 · 11-23-2014, 08:52 PM

Ok.. so this is how I secured the grille to the opening where the OEM reverse lights/reflector onced occupied.

Used OEM clips plus two bigger ones I had laying around from my 350Z days to secure brackets.

Fits nice and snug!

Ended up heat shrinking all the brackets to protect against corrosion and to conceal them better.

- Drilled a second hole to keep bracket from rotating. Used OEM clips to secure.

Wrapped OEM reverse light connectors in sandwich bags then 3M electrical tape and secured with zip ties.

2014 6-speed Monogram (37J)

11-23-2014, 08:52 PM	#25
zeal86 Senior Member Join Date: Jul 2014 Drives: Posts: 1,988 Thanks: 1,155 Thanked 1,870 Times in 899 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	Ok.. so this is how I secured the grille to the opening where the OEM reverse lights/reflector onced occupied. Used OEM clips plus two bigger ones I had laying around from my 350Z days to secure brackets. Fits nice and snug! Ended up heat shrinking all the brackets to protect against corrosion and to conceal them better. - Drilled a second hole to keep bracket from rotating. Used OEM clips to secure. Wrapped OEM reverse light connectors in sandwich bags then 3M electrical tape and secured with zip ties. 2014 6-speed Monogram (37J) Last edited by zeal86; 03-15-2015 at 11:11 PM.