Quote:
Originally Posted by JakeG11
Hey guys,
I am thinking about getting some Work XD9's for my 86! It has stock suspension and i was wondering if anyone knew if the below sizes will fit. I am thinking about having the backs wheels abit wider. Thoughts/opinions.
Any help would be great thanks!
Default PCDs and offsets available:
18 X 9.0 [45mm dish] - $440 per wheel [ 5-100, 5-114.3 / +30, +38]
18 X 10.0 [73mm dish] - $455 per wheel [5-100, 5-114.3 / +18, +38]
|
For fronts, use the +38 offset, should be close but may poke a bit.
For rears with the +38, will poke out quite a bit also.
10" size is pretty wide for the back, you will need to run lots of camber to make it work (Stance Nation) and small tires.
See here:
http://www.ft86club.com/forums/showthread.php?t=60585
If you go with 18x9 +38 all around, it should give you much better options and fitment. Will also allow you to run a 245/35R18 square, maybe bigger if you are lowered a tad.