Quote:
Originally Posted by mush
toms tail have their own running light strip(outter). then the brake light(middle), and the turn signals(inner). they are all seperate
im wanting to make the brake/signal both light up when u brake and both blink when u signal
if thats possible with a little bit of rewiring your kit
|
Oh yeah sure, you'd just connect the turn signal input (where you'd normally plug in backup wire) to the HIGH output from the module. No problem! Both the brake and turn lights would act as both brake and turn signal.
Quote:
Originally Posted by wrb
I am really liking this.... but is there way to make the turn signal lights to brake light instead of reverse light?
It probably requires a brand new plug-n-play...
|
Sure you'd just need to connect the bare wire (where you'd plug in the backup wire) to the brake light.
The paper installation instructions that come with the kit will include a number of different scenarios so you can make a custom connection if you'd like! Two t-taps will be included, so you can make the connections yourself if you'd like to make the old turn signal light up as the brake, still light up as turn, or do both, if you'd like, instead of connecting it to backup.