Quote:
Originally Posted by Tye300
@ Sithspawn, are you still using the stock WS fluid? |
Actually, I added Redline D6 transmission fluid to replace the fluid that was lost when I took my sample for analysis and when splicing in the cooler lines as well as making up for the additional capacity due to the cooler and lines. All in all, it was about 1.5 qts of Redline with the rest being the factory fill.
Speaking of analysis, I just received the results today and attached them below. Blackstone indicated that I can run the fluid to 30k. As you can see, the viscosity is already on the low end of the acceptable range (bottom quarter) with only 1 track day and a couple spirited drives on it with the factory cooler setup. So, while it still has life left in it, it's not 48k worth of life left in it.