Quote:
Originally Posted by jher
I just got my clutch installed so if you can't get it to go into 1st gear you used the 2nd gear to drive? Or your still able to get it into 1st some how. Just want to know so when I come across it I'll know what to expect.
|
Either keep trying getting into other gears and getting into first, or turn off car, put it in first and start it up
Quote:
Originally Posted by Ross
I have a customer with the same issue. we have done the remove, clean, lube per Exedy's directions, and reinstalled. When this ultimately did not resolve the issue, I removed the clutch and have sense installed a factory unit for the time being. While I had it out and had several other frs clutches available to me to inspect it against I found that the hub used on the Exedy stage 2 measures smaller then factory (which is made by Exedy but is a different hub), ACT, and CM. What I am assuming is that the difference in this hub size is what is causing the issue. As I have installed several different clutches in these cars now and this is the only one I have had any issues with. When every thing is finalized I will report back more about what I find.
|
@
Shady195 this is why tolerances is a possibility.
@
marcoaferrer @
alpine
Thanks Ross!!