|
I have a customer with the same issue. we have done the remove, clean, lube per Exedy's directions, and reinstalled. When this ultimately did not resolve the issue, I removed the clutch and have sense installed a factory unit for the time being. While I had it out and had several other frs clutches available to me to inspect it against I found that the hub used on the Exedy stage 2 measures smaller then factory (which is made by Exedy but is a different hub), ACT, and CM. What I am assuming is that the difference in this hub size is what is causing the issue. As I have installed several different clutches in these cars now and this is the only one I have had any issues with. When every thing is finalized I will report back more about what I find.
|