Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

vividracing · 10-06-2014, 07:30 PM

When running new wheels it is best to also run a set of aftermarket lugs, however as stated above, the stock lugs do offer the proper seat and can be used in conjunction with some aftermarket applications. After market lugs do come in many options to full-fill you needs and desires. The thread pitch needed for our lugs is M12x1.25. Also keep in mind if you decide to run new lugs with your new wheels, it is HIGHLY recommended that you re-torque the NEW lugs after 50 miles to ensure that they are seated properly, new lugs used with new wheels have been know to come loose.

10-06-2014, 07:30 PM	#9
vividracing Join Date: May 2012 Drives: 2013 Scion FR-S Location: Gilbert, Arizona Posts: 2,593 Thanks: 491 Thanked 1,065 Times in 617 Posts Mentioned: 49 Post(s) Tagged: 3 Thread(s)	When running new wheels it is best to also run a set of aftermarket lugs, however as stated above, the stock lugs do offer the proper seat and can be used in conjunction with some aftermarket applications. After market lugs do come in many options to full-fill you needs and desires. The thread pitch needed for our lugs is M12x1.25. Also keep in mind if you decide to run new lugs with your new wheels, it is HIGHLY recommended that you re-torque the NEW lugs after 50 miles to ensure that they are seated properly, new lugs used with new wheels have been know to come loose. Last edited by vividracing; 10-08-2014 at 05:13 PM.