Quote:
Originally Posted by TIE Pilot
Why an on/off switched? why you need a "elegant" way for something that is not visible? Just unplugged it. If you can forget to unplugged then you can easily forget to turn off a "on/off switch". Unless you are thinking of an auto-power off obd cable. What if this elegant solution malfuction during ECU writing process.
OFT may offer this in future firmware anyway.
|
It's not a matter of forgetting. The male/female heads basically have a limited number of uses - lots of people with bent pins, would be particularly bad if you busted the female port on attached to the car. I can only assume same goes for the molex connector on the OFT side.