|
Just want to thank everyone involved in the DIY. This was very detailed and straight forward for someone like me who has never done anything like this. I only had issues when putting the strut back into the hole and having it come all the way through. Eventually I figured it out. I only got to do the front because I spent so much time and was starving. (my own fault for not having all the sockets organized and not doing a couple things right the first time. I will finish the rear today though. Looks easier.
Oh 1 question. I feel like i held the allen pretty good while using an open socket to tighten the nut but felt it turn the allen turn a bit while doing it. Would a little turn damage the strut? How would you know if something is wrong. The car drove fine. No weird noises or anything.
|