Quote:
Originally Posted by DustinS
They are 0603( in the door switches), but if I remember correctly, you can use the PLCC-2. They will just be a bit brighter. I would recommend using the correct size, but shouldn't hurt too much. You must use the correct size(0603) when it comes to the Base radio, as there are cut outs in the buttons for the LED to fit. 0805 Might work, but might as well order the right one first time.
|
For the 2015 BRZ Series.Blue, there is enough room behind the buttons for PLCC-2 LEDs but the solder pads are too tight to get them soldered in. The 603 will work but are smaller than the stock LEDs.
Sent from my iPhone using Tapatalk