Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Carbon parts for GT86/FR-S/BRZ

DanyRay · 10-02-2014, 04:44 PM

All parts are made by myself.And I want to briefly show "how to do carbon parts" . First, my creations.

An example of cover injector, to show you how to make carbon part.
Cut the fabric to the required size.

Carbonfiber prepreg also cut.

Everything laid into the matrix.

Then, all under vacuum in an oven.Excess resin absorbed into the peel ply and absorbent layer.

The result is this. Weigh 0.055 kg.

OEM cover

Everything was done to reduce weight.Bonus - beauty.

If you have questions, ask.I will answer in more detail.

10-02-2014, 04:44 PM	#1
DanyRay Member Join Date: Mar 2013 Drives: white GT86 Location: Russia Posts: 10 Thanks: 0 Thanked 12 Times in 4 Posts Mentioned: 0 Post(s)	Carbon parts for GT86/FR-S/BRZ All parts are made by myself.And I want to briefly show "how to do carbon parts" . First, my creations. An example of cover injector, to show you how to make carbon part. Cut the fabric to the required size. Carbonfiber prepreg also cut. Everything laid into the matrix. Then, all under vacuum in an oven.Excess resin absorbed into the peel ply and absorbent layer. The result is this. Weigh 0.055 kg. OEM cover Everything was done to reduce weight.Bonus - beauty. If you have questions, ask.I will answer in more detail. Last edited by DanyRay; 10-02-2014 at 04:54 PM.