Quote:
Originally Posted by fenton
Hi FT86Club!
We spent some time on the dyno today with the mythical TQ300 and 6K controller. Just like any other dyno day, things do not always go as planned. On the first "Stock" run with the supercharger removed my car threw the P0351 Coil pack one code. We are suspecting that the coil pack on the fritz has introduced some issues with the top end (Code would always come on above 6500-7000rpm). Although i wasn't datalogging(DOH!) i am also guessing that timing is being pulled a bit on the top. Looks like i will have to work a little more with @ Shiv@Openflash on dialing in things a little more. |
The P0351 is a faulty Coil Pack 1. This results from the coil breaking down over time due to heat. Take it to the dealership with the code on and they should replace it. I believe it has something to do with the location of the overpipe which causes it to get heated more than the others. I have the issue only in 4th gear at about 7K+ on hot days so I can't get it to come on right now, but it has been documented.