Quote:
Originally Posted by DeliciousTuning
Hi,
I just checked your tune and it has everything active with respect to the EVAP codes as it should be from the factory. It looks as though we did shut off a couple other codes though that relate to Mass Air Flow Limits but that is about it. I am not sure how that would affect it.
Are you sure you are on the latest tune with the EVAP codes active? I will resend the email I sent on Sept 8th.
Cheers,
William Knose
Delicious Tuning
|
Yep that's the same tune I ran and threw those codes. I have the aem wideband analog signal wire connected to the rear evap sensor, which is why those codes are being flagged. Custom map O result.
I can't connect the wideband to the rear o2 input because I have flex fuel connected to that input.
Same car, same setup, your newest tune you resent vs other tune from someone else. As soon as I fire up the car it throws evap codes high low voltage. Which makes sense because there is no evap voltage, its the ethanol sensor voltage and the car is like wtf.
I will try the tune you just sent me and report back. Maybe the logic for the evap needs to be adjusted so any voltage is in the normal range? Maybe that's how the other tuner does it?