View Single Post
Old 09-26-2014, 10:10 PM   #14
chkltcow
Senior Member
 
Join Date: May 2014
Drives: 2013 FRS White w/ cone marks
Location: Mt Holly, NC
Posts: 102
Thanks: 23
Thanked 45 Times in 31 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by gramicci101 View Post
My opinion only, but you shouldn't upshift faster than the RPM can drop by the requisite amount. If there's an 800 RPM difference between second and third at a given speed, you should be letting the clutch out right about when the engine has dropped by 800 RPM. Releasing the clutch before or after that point puts unnecessary drag on the engine and drivetrain and does not result in a smooth shift.
It doesn't help that our flywheel is approximately 90% of the entire car's weight.

Back on topic... yes go to an AutoX. Granted you'll only shift once, but you'll learn a ton about driving and car control in a safe environment. Even if you don't drive, go to one and see if you can ride along.
chkltcow is offline   Reply With Quote