[DAEMANO]

Originally Posted by PantsDants

So I've noticed I have some corrosive stuff forming on one of my battery terminals (front negative on the standard dump pack, not the big, main terminal). This was one of the batteries I had the arcing mishap on during my install. I haven't taken the cover off to inspect any other terminals just yet.

With this knowledge, should I just clean off the crud, apply corrosion inhibitor and keep an eye on it? Or should I be considering battery replacement at this point? I'm concerned because I thought these were supposed to be sealed batteries. Input is appreciated, thanks.

Sounds like a reasonable thing to do. OR you could just replace the battery. They're pretty darn cheap so no harm no foul if you just have to get another one.