Quote:
Originally Posted by galrath
First day of using the OFT. I just installed my UEL headers and decided to see how it all goes.
I had previously logged my car standard on the standard tune to try to get the MAF scaled and have added that scaling into the 2.06 OTS tunes.
I am not 100% convinced just yet and I think I am going to be a little wary for a while for no other reason than being scared of what it has the potential to do.
Here is my log anyhow - in the log you can see I did 2 back to back 3rd gear 2k-7k WOT runs to see how it looks.
Let me know what you think.
http://www.datazap.me/u/galrath/stag...4?log=0&data=1
Dave |
The maf scaling in the 2xx tunes is pretty good, that log the scaling looks ok except off idle where its -6% .
looks like you need to pull another 1 degree out of the base timing b advance from about 5000 to redline loads over 1.0 as that knock is pretty consistent. then probably tweekk up the iat vs timing retard to cut in above 86F.