Quote:
Originally Posted by asdf
If you read this very thread, questions 1 and 2 will be answered.
3. it is a fairly simple task that may take longer than anticipated if you do not have the right tools. For a spring install, a spring compressor will be a great help. You can definitely do it w/o one but it makes it easier to remove the spring/shock from the car and to take it apart. Plus you can't rent the tool from your local autoparts store for a deposit and get a full refund when you bring it back.
|
1. was answered by only a few and I wanted to hear more because there is always someone to the contrary and I want to hear why his opinion is.
2. All that is said is that they are not needed. But if i'm taking the car apart anyways should I do the bolts? or not because I'd just take them out again when I swap rims. Which may be soon than I thought. so again wanted more input
3. can or can't? i have an orielly's autozone and napa 5 mins from where i work so if i can, I will rent one, if I can't ghetto fab C-clamp
