Quote:
Originally Posted by Shady195
Figured I would just let everyone KNow i got my Open Port and successfully flashed my car without much issue..
However a couple of things..
1. I would update the original post, as the latest version of ECUFlash comes with the definition files needed, no need to do anything other than download ECU Flash
2. I had an issue from the start where my OpenPort would not finish reading my rom, it would get about 20% and fail.. I tried a million things then simply just swapped USB ports and it worked just fine. I even put it back in the original USB port I had it installed in and it happened again. I know that USB port is fine however I know some devices can be picky about how good its connection is and an "acceptable" error rate.
So if you have similar issues just try swapping the USB port you're in.
|
Its ok if your in USA but other guys need to download latest Defs for their region. The 32bitbase supplied is out of date as well. It will work but missing some parameters and does not have latest bug fix's.
The USB issue may be power, some ports on laptops may not supply current required for tactrix. The ODB ports connector can be a bit suspect on brz/86 as well.