|
Two cents
Wanted to add a few tips.
- I bought an extra BRZ bumper cover from the local (SoCal) dealership for $5.50, and it took about a week to get in.
- When installing the shaft into the car frame, don't forget grease! Also a torque wrench is a must, as it turned many more times than I would have expected.
- While some photos seem to show that the license plate is mounted in the lateral plane, it turns out it only fits on an angle. I have mine at about 10 degrees, which is a bit more than necessary but it gives me piece of mind that the bumper paint is safe.
|