Installed my LED DRL strips over the weekend, following the DIY
here. Pretty straightforward, here's some tips:
- If tapping the cigarette lighter wire behind the glovebox, take the glovebox off, and find someone with small hands to get in there (the DIY seems to show a lot of space, I had some weird box labeled something-something-ECU in the way)
- I had to make a slit in the rubber grommet to push the red power wire into the cabin.
- when prying the old foglight bezels off, start from the inner corners/tips and work your way up. No need to really pry it - as soon as you get a finger into the inner corner, just slip a flat object (corner of a credit card works) into the places where the clips are (look at the new bezel to check where the clips are) and it will pop out with slight outward pulling.
It is really, awesomely bright at full power. I would say temperature of the LED's are somewhere around 5k, a little on the cool white side.
Alex of Fuzion Teknique (@F-T) is an awesome guy, easy to deal with, and very accommodating.
