Quote:
Originally Posted by zoth
Oh, boy I hope my Black of the self o-rings won't give me any problems. (A little bit more torque than snug fit)
|
This time I tightened the base until I saw the o-rings start to squeeze out then backed off ever-so-slightly. I then held the base firmly in place as I tightened the AN hose fitting on snugly to make sure the hose AN fitting didn't further tighten the base. I'll have to remove the bumper to check in a couple of weeks.
I'm about ready to invest in a cable camera so I don't have to keep removing the bumper
http://www.homedepot.com/p/Ryobi-Tek...4206/202223756