Hi guys,
I'm just about to install Toda lightweight pulley set. However, when I see the torque instruction, I get a bit confused.
(I am quoting exactly like the instruction).
Tighting torque (Only to be used as a reference)
Crank Pully bolt = 20 N.m (2.04 kgf.m) + 90 deg
Water pump pully bolt = 14 N.m (1.43 kgf.m)
Alternator pully bolt = 108 N.m (11 kgf.m)
I dont understand the "
90 deg" part
. Could anyone explain it to me?
Thank you so much for the help