|
The input shaft is still spinning.. Putting it immediately in 1st causes it to come to an abrupt stop. Don't go 4th to 1st like that so fast. Downshift to lower gears and clutch in at a low speed / low rpm about 10 - 5 feet before the stop sign. Wait 1/2 second and then go into 1st. You're not driving very efficiently by clutching in from 20 mph all the time. Try clutching in at 10 mph in 3rd gear instead.
Otherwise, if you need to throw it into 1st at 10-15 mph (like during autocross racing) then you'll need to double-clutch.
Last edited by radroach; 08-24-2014 at 03:15 PM.
|