Quote:
Originally Posted by elBarto
@ steve99 : You seem like the flashing Guru here  .
I was wondering can I flash a ZA1JD00G file (the one that @ Shiv@Openflash recently released for the 2015 EU-MT) on my 2013 GT86 with CalID ZA1JA00G. I've hex-edited the Bin file to read A00G and edited the XML-definition to read A00G so I don't have errors in RomRaider, but I'm a little scared that I will break something if I flash it through OpenFlash Tablet.
I've also been reading your topic about the Australian Ron98 knock fix and used your findings to run my EUDM GT86 on ron95 with great success, so many thanks for that also |
As per @
Td-d post changing calid can be done but its full of hidden traps and pitfalls best to leave it alone and wait for the experts at OpenFlash OFT to release the correctly modified ROM's and matching definitions.
As @
Td-d says if you have tactrix you don't need to worry just use the matching D00G definition, but if you have OFT its best to wait for the official release unless your are very sure of what you are doing. or your stock ROM was a D00G then it will load fine with OFT without doing anything.
The OFT has a protection feature to stop you loading ROM's with a different calid, it was put their for good reason.