08-15-2014, 09:45 PM
|
#3
|
|
Senior Member
Join Date: Jul 2012
Drives: Raven Scion FR-S
Location: Queens, NY
Posts: 665
Thanks: 32
Thanked 79 Times in 55 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Originally Posted by FRSfan111
Lots of paint places can match paint to your paint code. There's a couple I've used that put it in spray cans as well. I would suggest that. But being that it's Polly it likely has a bit of an oily finish that will not hold paint. Most important thing is going to be prep work. Sand it down, primer then paint, clear. When I paint lips/rims I usually sand, primer, wet sand, thin primer then 3 coats of paint and 2 coats of clear. Don't spray heavy, you don't want runs.
|
What grade of sand paper ?
I actually found this http://www.automotivetouchup.com/tou...paint/buypaint
__________________
"To make it in America you need three things, a smile, a gun, and a plan. If you need to give up one thing, give up the smile. If you need to give something else up, lose the gun. But never, ever, give up your plan."
 |
|
|