08-13-2014, 11:00 PM
|
#1291
|
|
Senior Member
Join Date: Mar 2013
Drives: 2013 Scion FR-S
Location: San Diego, CA
Posts: 285
Thanks: 120
Thanked 135 Times in 87 Posts
Mentioned: 13 Post(s)
Tagged: 1 Thread(s)
|
Quote:
Originally Posted by DriftEm
Yes, I have USB selected for the connection type. I do plug in the USB device with the Torque off, the torque starts as soon as USB device is plugged in, but when i go to choose the USB device from under setup option, it says "no recognized device detected" I have already rebooted the Dashlinq and still no luck. I'll try the baud rate, I have it setup on "auto", I'll change it to 38400 see if that helps. thanks
|
Quote:
Originally Posted by Orisai
In the Torque options, make sure you have USB selected in "Connection Type". Also, you may need to restart Torque and manually choose the USB device if you plugged your SX after you opened the app.
In case it gets recognized, you may need to set the USB baud rate to 38400 in your Torque settings for it to work properly. Some OBDLink devices are set to 115200, which is way too high for them to work properly withot losing connection or data to framing errors.
|
38400 rate didn't help, @ xjohnx any suggestions?
|
|
|