Quote:
Originally Posted by HarryS
LapTimer collects and merges data from GPS, acceleration, OBD and video. By the way and back to the above discussion, OBD helps a lot for instant speeds, latency is around 0.5 seconds only. Please note LapTimer is focussed on OBD data recording and supports racing relevant PIDs only. It is not a versatile OBD tool like Torque and all the others. Data collected and e.g. overlaid are RPM, speed, gear, throttle position, oil / coolant temperature, power / torque developed, boost (pressure).
Please do not use LapTimer's OBD data recording and Torque at the same time. This will drive the sensor crazy :-)
- Harry
|
I am only concerned with the oil/coolant temps and engine speed anyways
I cannot use torque and other OBD data recording at the same time since my BT OBD2 adapter only allows me to use one device at a time (I use my NEX7 for data recording via OBD2 adapter)
I purchased the HLT like a year ago but haven't used it that often since I have been using my GoPro and RaceRender for telemetry but if it collects the above data I can start using it again
Quote:
Originally Posted by buddy32
I do it with two devices. Harry's on my cell phone with a suction mount to windshield, and torque on nexus 7 with a magnetic mount on dash.
|
that's what I've been doing but I use my Nex7 with special mounts in the center console
