Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

sidebrake · 08-11-2014, 04:21 PM

Hi Fellow FT86 Owners,

I'm preparing to install 18 inch wheels with coilovers and adjustable RLCA. Is an adjustable rear toe arm necessary if I want to zero out the rear toe or will I be able achieve zero with the stock toe arms?

I'm aiming to dial around -1.5 degrees of rear camber and only lowering enough to eliminate the wheel gape. Thanks to anyone that can provide some info on this.

-SB

08-11-2014, 04:21 PM	#1
sidebrake Member Join Date: Feb 2014 Drives: '14 BRZ Limited Location: CA Posts: 17 Thanks: 0 Thanked 3 Times in 3 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Question on rear toe Hi Fellow FT86 Owners, I'm preparing to install 18 inch wheels with coilovers and adjustable RLCA. Is an adjustable rear toe arm necessary if I want to zero out the rear toe or will I be able achieve zero with the stock toe arms? I'm aiming to dial around -1.5 degrees of rear camber and only lowering enough to eliminate the wheel gape. Thanks to anyone that can provide some info on this. -SB