[steve99]

Originally Posted by Walla Walla

made the suggested correction, and it really helped!

http://datazap.me/u/walla-walla/bpb-...0&data=1-11-12

i removed 1 degree at 6 000 rpm on 1.2/1.3/1.4 load, and 2 degree at higher rpm on same load!

thanks for the help @steve99, now as I understand, it's doing great! (even if i sometime have knock correction, but it think it is not a dangerous situation under .7?)

Yes that right if its just random spikes of 0.7 or less its ok, if its consistent and at same rpm/load point it might be worth pulling 0.35 or so if your rearly keen.