Quote:
Originally Posted by chinarossesz
Took it to a local body shop, and the estimate is 700$ to and and repaint the whole bumper. I don't know if this is worth it to put another coat over the factory coat. I think its small enough that I can do touch up paint. Any thoughts? Its about .25 inches wide and 5 inches long, corner bumper.
Sent from my RM-820_nam_att_100 using Tapatalk
|
I did this exact same thing pulling into a parking spot and hitting a very high curb. I ordered paint matched rattlecans from automotivetouchup.com, masked the area off after sanding/prepping, and blended the area in with the factory paint with the base/clearcoat. Took a lot of wetsanding after that to make it look good a few feet away. It worth the money to see if you can get good results IMO, and if all else fails get it resprayed.
If you want a quick fix head to the dealership and get touchup paint with the brush in the cap, with some very minor sanding/prep you can mask it pretty well and it will look decent from 15 feet away