Quote:
Originally Posted by stugray
There are 4 CV joints on these cars. One at each end of each rear drive axles.
In the manual they are referred to as "EDJ"s or EBJ (extensible ball joint  )
In the manual I dont see any bolts on the axles to torque though. |
If the bolts holding the rear axle bearing housing to the rear axle carrier were loose that would be some seriously dangerous mojo.
Besides the axle nut, those are the only other axle-related fasteners I see potentially needing to be torqued.
But there's no actual torque being applied to that joint. Just a cantilevered load.