View Single Post
Old 07-19-2014, 04:00 PM   #143
Shiv@Openflash
Senior Member
 
Shiv@Openflash's Avatar
 
Join Date: Sep 2013
Drives: 2013 FRS
Location: SF, CA
Posts: 2,629
Thanks: 1,055
Thanked 5,470 Times in 1,494 Posts
Mentioned: 605 Post(s)
Tagged: 9 Thread(s)
OFT: v2.0 E85 Beta (USDM 6MT only) now available for download

Hi guys,
E85 maps are now available for ESC 1.5+OFH. I've just added an E85 folder to the download. As with all v2.0 maps, they are based on the newest B01C ROM. They are currently on available for USDM 6MT. USDM 6AT will follow soon.

For the sake of beta testing, when first switching over to E85, run your tank close to empty. This means the needle should be below E (well after the low level light comes one). After for your first tank of straight E85, you don't need to be as strict (the tune will adapt down to E60 without any problem).

Also for the first time, flat-foot-shift is enabled as DEFAULT. Just because it's really fun. I set it up to only activate when shifting past 6500rpm. So if you want to experience it, just flat-foot shift at 7000-7500rpm. This means just clutch-in between shifts but stay WOT (don't lift off the throttle). It will grab the next gear with boost and a good deal of ferocity

Enjoy!

Cheers,
shiv
Shiv@Openflash is offline   Reply With Quote
The Following 9 Users Say Thank You to Shiv@Openflash For This Useful Post:
DAEMANO (07-19-2014), fenton (07-19-2014), Jac (07-19-2014), Robftss (07-19-2014), shif7i7down (07-19-2014), Sojhinn (07-19-2014), TM (07-19-2014), WNDSRFR (07-20-2014), WRB5titch (07-19-2014)