Quote:
Originally Posted by aznatama
Don't forget to also get the correctly sized hole saw to place it in the correct side of the plastic trim. The camera goes on the driver side, since the HU lines are offset to account for the factory placement.
The kit I got includes everything, has sufficiently long wires, 99% plug and play (with the exception of tapping a 5vdc wire on the HU w/ an in line splice.
You could go piece a kit together yourself, but I have no idea about camera quality or any of the other harnesses required.
|
I'm bringing this thread back from the dead.
Could you be a bit more specific on what wire you were supposed to splice? I can't really tell from the pics, but it looks like the camera had a small connector and four wires (not inserted into the connector) on it. You mention that one pair of the wires was for reversing the image and the other pair for removing the lines. Where was the power line? Was it in the connector?
Thanks.