Quote:
Originally Posted by sw20kosh
Is re-wiring the stock fans really as simple as it sounds?
|
that depends. If the factory wiring/fuse/relay can handle double its intended load then sure, slice the other fan into the first fans wiring harness but I doubt it. You would most likely have to either run a new wiring harness with a relay that is triggered by the primary fan OR removing the trigger wire for the secondary fan and splice the primary fan relay trigger wire into it so the thermostat triggers both relays. The aforementioned probably the best-easy options. The best hard option involves wiring it in a way that turns on both fans with the thermostat and one fan when the ac is on. I need the car to figure that one out as electrical stuff isn't really my favorite thing to do.