Here's what I got... little hazy/dull on the inside to my liking, but overall really happy for $30 of materials and my time. I put about 6 coats on (little heavy I know), so I need to get clean up the red paint a bit to make it shine clearer. It doesn't have a clear coat yet because I sanded it off to clean up the red paint a bit more... All this has is red sanded down with 1500 and 2000 + sealant. I wanted to make sure it was heading down the right direction before I put clear coat on again. I'm going to hit it again with 1500 and 2000, polish it down with Meg UC or 105 with my XP7424, clean up with soapy water, add 3 layers or clear, let dry, wet sand again with 1500 and 2000, polish, and lastly sealant/wax.
[IMG]
[IMG]
