Quote:
Originally Posted by HeadBanger
|
Google did a decent job translating the page actually...
● Color / matte gunmetal / matte bronze ● (Specifications vary by color) center cap, with valve
● JWL VIA Standards Compliant
● (I except
★ 1 / ★ 2) hub diameter / P.C.D100ø67/P.C.D114.3ø73
● repair parts: Center Cap ¥ 3,000 (tax included) / valve ¥ 1,200 (tax included)
● 16 ~ 18inch is, E52 Elgrand sensor valve corresponding model Lexus GS.
● hub height are written after the inset numeric () Figures in parentheses are (mm).
●
★ Aqua (10 series) / Vitz
1 is (130 system) dedicated hub centric ø54. (Taper nut correspondence)
●
★ Prius (30 series) / Wish (20 system) dedicated hub centric ø54,
2 you can use the original aluminum wheel nut. (60 ° taper nut can not be used)
●
※ 51 fugue, V36 Skyline Coupe,
1 is the Z34 models matching big calipers.
●
※ 2 is the crown 3.5L caliper models.
●
※ 3 is Impreza GDB / GRB / GVB Brembo calipers model.
●
※ 4 is EVO5 ~ 9 Brembo calipers model Lancer.
●
※ 5 is the Lancer EVO-X models matching BREMBO calipers.
●
※ 6 The V35 Skyline Coupe is the Z33 models matching BREMBO calipers.
●
※ NEW Solio,
7 Delica D: 2 is the corresponding model.
※ There are some errors may occur on the manufacturing process (weight) the number above WEIGHT.
※ Some size, disk so we have projects from the rim this product, please be careful on the occasion of wearing.
Looks like the PCD 100 is a 67mm center hub diameter. So I'll run a 67mm OD and 56.1mm ID AND if you bring the wheel sometime we can test fit it and measure the actual wheel.
Ken