View Single Post
Old 07-09-2014, 07:43 PM   #2
steve99
Banned
 
Join Date: Dec 2013
Drives: FT86
Location: Australia
Posts: 7,996
Thanks: 1,035
Thanked 4,992 Times in 2,983 Posts
Mentioned: 598 Post(s)
Tagged: 2 Thread(s)
Quote:
Originally Posted by Yamajee View Post
Hey guys,

I'm still not sure if this is an ignition coil problem or a DI failure. No popping noises for me, had the P0351 code pop up a lot of times and cleared it a lot of times, it's just that it came up at high RPMs and didn't do any harm or show anything like the ignition coil is really faulty. But, now there's no CEL and whenever I go WOT I can feel the car hesitating like some sort of lag whenever under 5k RPM, and after 5k RPM the rpm goes up smoothly. Any idea?

My best bet is the ignition coil giving away, but can someone explain to me the symptoms of a direct injector failure as to relating that failure to my problem? did it cause any mis-fire or hesitation on WOT when your injector failed?
definitely looks like coil 1 failed (last digit is coil number) , this coil seems to fail the most maybe due heat , when code returns leave it up ,should be done under warrante unless you have significant mods eg turbo.

you usually get firecracker/popping sounds with DI seal failure, often with no cel.
steve99 is offline   Reply With Quote