Quote:
Originally Posted by d1ck
This is what's in my logcfg:
So it doesn't appear that the scaling is set on mine, however it doesn't seem like the formula in the one you posted is correct either. Based on my logs the formula should be:
Commanded AFR = 14.7 - (14.7 * x)
in RPN I think that would be this:
Commanded AFR = 14.7,14.7,x,*,-
I'm not sure if this is the correct notation for this formula or not.
Also, I came up with this for throttle plate percentage. I think it's correct.
|
The throttle position never goes to 100 % its always something like 90% at WOT, its been the subject of much discussion Ecutek logs it at less than 100% as well (80%) from memory. Open flash tablet loggs wot at 90%
That scaling for AFR works for me on G rom, usually just the address changes and scaling are same.