Quote:
Originally Posted by dradernh
Even at the low level of downforce being generated by the Hancha/FT-86 Speed Factory splitter, if Eric ran a sim with a radiused edge the difference would be quantifiable. If he's done that, it would be instructive to see the change in downforce.
I would guess that he's already done it, if only out of curiosity, unless perhaps he's using a service, having to pay for each run, and knew he wasn't ever going to be offering a radiused edge in the first place. I'm a data guy, so that drives my curiosity regarding subjects like this.
|
Quantifiable to what extent?
Im sure there are plenty of ways to make this splitter imcrimentaly more efficient, but how far do you want to take this?
Looking at lap time, would the rounded edge give you another second? No.
Another 1/10th? No.
There are so many other areas where you can shave a 1/10th easier and cheaper.
So, it's not worth it to take it to that extreme.
Besides, one could always run a router over it after the fact if a person was so inclined.
For me, it's not woth it.
Ill take 95% efficiency at 75% cost almost any time.