Quote:
Originally Posted by Draco-REX
There doesn't appear to be any cutting. I can't get a good look at the lower left outlet, but the shroud near the upper right was untouched. The oil lines connect along the side so there's no interference there either.
I fired off a question to my friend asking about any modification, I'll let you know what he says.
Maybe there was a revision I don't know about.
To tug this back On Topic..
The Robispec radiator seems to push everything forward. So the exchanger wouldn't fit behind the bumper beam. I had to bend the tabs on the mounting brackets and coax the condenser lower to get it to clear. I think I might pick up a "drift bar" in the future and get everything where it should be.
|
I'd like to hear what your friend says. It was the lower outlet that was the issue for us.
Also, the AN fittings on the side were interfering with the ac hard lines.