Quote:
Originally Posted by Sleeper86
Thanks finch1750, I just tried and test fit today and I know what kind of high temp you talking about now, I have some Acoustic Foam padding if I wrap those around the control module do you think the heat will damage it? or the foam will even lit up and cause fire? I have dremel tools, what kind of cutting for a mount you referring to, any pics?
|
Im really not sure. I have no idea what it would take to actually damage it but just didnt want to risk it. The cutting is in the lictures I reuploaded in a previous post. Shows how i was able to mount the piece in the stock location under the new boot still.
Quote:
Originally Posted by AG3NT_5CARFAC3
Sorry for the super late reply
I bought a MT boot from the forums that a person was selling. I removed the shift bezel and removed the AT boot. For the At boot, you will notice a rubber-ring at the very top. I cut about 2 inches down of that ring and inserted it into the MT boot, from the inside of the MT boot, to the top, on the inside. I then cut (I believe) 4 small slits so the MT boot would fit perfect when the PNRD panel was re-installed. I then installed the whole shift bezel back into place and screwed back on the shift know and slid the rubber ring over the bottom of said knob.
After about 1.5 years of doing this "mod", I still get people at local meets asking if this is a MT lol :P the only giveaways are they can see the paddles on the steering wheel and...the missing third pedal lol I hope this helped. Feel free to PM me if you still need help. I could always take pictures and help you if need be.
|
Ok, so you took the AT ring and sewed it in the MT Boot, or how did you attach it? I just know yours looks way cleaner than mine. Lol
Ill send you a PM though as I want to make sure I know what Im doing before cutting stuff up. Haha.