Quote:
Originally Posted by finch1750
BTW @ AG3NT_5CARFAC3 I have seen your shift boot on instagram and it looks clean. how did you get it to fit that way on the shift knob? Mine has loosened over time and I am thinking about just going with a custom shift boot because of it. |
Sorry for the super late reply
I bought a MT boot from the forums that a person was selling. I removed the shift bezel and removed the AT boot. For the At boot, you will notice a rubber-ring at the very top. I cut about 2 inches down of that ring and inserted it into the MT boot, from the inside of the MT boot, to the top, on the inside. I then cut (I believe) 4 small slits so the MT boot would fit perfect when the PNRD panel was re-installed. I then installed the whole shift bezel back into place and screwed back on the shift know and slid the rubber ring over the bottom of said knob.
After about 1.5 years of doing this "mod", I still get people at local meets asking if this is a MT lol :P the only giveaways are they can see the paddles on the steering wheel and...the missing third pedal lol I hope this helped. Feel free to PM me if you still need help. I could always take pictures and help you if need be.