Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

D-VO · 06-27-2014, 10:05 PM

I noticed this wasn't posted anywhere and thought it would be nice to keep this info here.

Manifold Pressure Sensor Scaling -
Multiplier - 12.087
Offset - 0.168

Manifold Pressure Sensor Limits - (CEL still comes on for me)
High Input CEL Above - 5.00v
Low Input CEL Below - 0.00v

Since I was still getting CEL's for P0103 and P0068 I just turned them off.

If anyone finds a way to keep those DTC's on in case there is ever an error that we need to know about, please let me know so I can change this. Thanks!

*EDIT*Just ran into some more MAP sensor settings here: http://www.ft86club.com/forums/showthread.php?t=64790

06-27-2014, 10:05 PM	#1
D-VO Senior Member Join Date: Sep 2012 Drives: Whiteout FR-S, Evo 8 RS Location: Kissimmee FL. Posts: 242 Thanks: 131 Thanked 42 Times in 32 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	Omni 4 Bar Settings I noticed this wasn't posted anywhere and thought it would be nice to keep this info here. Manifold Pressure Sensor Scaling - Multiplier - 12.087 Offset - 0.168 Manifold Pressure Sensor Limits - (CEL still comes on for me) High Input CEL Above - 5.00v Low Input CEL Below - 0.00v Since I was still getting CEL's for P0103 and P0068 I just turned them off. If anyone finds a way to keep those DTC's on in case there is ever an error that we need to know about, please let me know so I can change this. Thanks! EDITJust ran into some more MAP sensor settings here: http://www.ft86club.com/forums/showthread.php?t=64790 __________________ Last edited by D-VO; 06-29-2014 at 02:29 AM.