Quote:
Originally Posted by Dustin
Stock intake. I need to do either a DIF or the Airaid. After talking with you the other day, the 69mm might be in my near future. It was pretty warm. Texas heat, gotta love it. About 90ish degrees outside and a bit warmer inside. Pull was done in 4th gear.
|
Well that shows the tune is reliable and consistent even in pretty hot conditions. Definitely a great test but if you want to hit the 300 mark I bet this will be the winning package.
Dyno Scenario
DynoJet with STD Correction as you have done
Cool dry day in the 60's-low 70's running 5th gear (1-1 ratio)
Vehicle Setup
Innovate Supercharger with Intercooler
Delicious Tuning 69mm Pulley (little more power overall)
Airaid Intake (little better flow on top end)
Remove the snorkel or make the hole opening larger (better air flow)
With all this in place I would expect 300+ whp, as each as a little power here and there and all of it together will net you the magic number and still on stock headers potentially.
Cheers,
William Knose
Delicious Tuning