Quote:
Originally Posted by tech86
Apologies if my newbie status is showing here but just looking at the files relating to G series ROM and just trying to understand how parameters are added etc.
The list below are 10 of the 34 parameters from the G SERIES ROM logcfg.txt example that I cannot see listed in G series ROM RAM addresses.txt file. So my question is, where do these addresses come from? Is there a generic list which covers all ROM's not just the G Series?
FFF8A8A0 AF_Learn_3
FFF8AD70 BaseTiming
FFF89393 Defogger
FFF887E8 Direct_IPW_0
FFF87C68 ECT
FFF8B066 FLKC_Offset
FFF87C70 MAF
FFF842AC MAF_V
FFF87C60 MAP
FFF8AB08 Tip_In_Enrich
I've had no issues getting the example cfg file dumping data to the SD card on my tactrix so thanks for the guide Steve.
|
As this is opensource stuff its just what the guru,s dig up after countless hours of reverse engineering the ecu code, Td-d appears to do the lions share of this work aver at romraider . The G series logcfg i posted was given to me by onother chap who hunted arround in the ecu code ztan who appears to have retired now so its likely he dug up some different parameters. The lasest ones i posted from Td-d will need testing as he does not own a BRZ think he has wrx sti.
sometimesits just a different name eg ECT as oposed to engine coolant temp or similar