View Single Post
Old 06-20-2014, 02:28 PM   #3
Apex_BRZ
Senior Member
 
Join Date: Aug 2013
Drives: 2013 Subaru BRZ Limited (WRB)
Location: Iowa
Posts: 259
Thanks: 9
Thanked 81 Times in 53 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by PMPB View Post
By brake lights, I take it that you mean the ABS/TC light that first appeared on the dash. I think that if the sensors get really wet and then dry it can possibly cause the ABS system to freak out a little and thus the ABS/TC system will shut off to prevent further problems related to that system.

The Canbus network issue COULD be related to your OBD2 reader. How about you disconnect the battery and the ECU reset. Do not reconnect the OBD2 reader, and just drive casually for a bit to see if anything comes up again.
I cleared the code already and it hasn't come back yet as mentioned in the post. The reduced power is the only thing that seems to be sticking around. I'll see if it's the same way again on my drive home. Going to check the air filter tonight and lift the car up and check it out. Could be something simple after hitting all that water. Although, if it were, I would expect that a reduced power issue would have been going on the whole time...not immediately after I cleared the code. Which is odd.
Apex_BRZ is offline   Reply With Quote