we also just finished installation of the KW kit, but we had to make a few mods.
because we are located in Europe , the GT86 comes with HID lights stock and so is equiped with a high pressure washer system.
Things we needed to modify:
- KW washer bottle, we needed an extra hole for the headlight washer pump
- intercooler cold side was hitting the washer nozzle, it was either the ic pipe or the nozzle, so we modified the intercooler piping
now we need to figure out a custom tune because we are using the OFT.
we also have SARD header, SARD cat pipe, milltek exhaust and mishimoto low temp thermostat.
pictures of the build can be found on our fb page:
https://www.facebook.com/media/set/?...8047905&type=3
Any tips on priming the rotrex oil system? did you guys really deconnected all injector clips like the manual says ?
For the tune, do we NEED an upgrade map sensor like they come with the ecutek package or can we just go with stock MAP and rescale MAF ?